Having concerts or shows at night means that you have to pay close attention to the lighting in the venue. As much as possible, you should provide for the proper lighting of the stage, one that is appropriate for the shows that you are hosting. For example, you should consider using the RGB laser show system when it is applicable.
The said equipment is the one where you will be using lasers to shoot off beams that will make the venue more concert-like. The stage will be adorned with different colored lights. The audience will feel more excitement as well. If you plan to use this lighting to make the event successful, then here are the factors to take note of.
First, you have to know how to get the proper beam direction. The equipment will be shooting off beams so you have to put it at the right position. That way, the beams can be aimed at its proper course. As much as possible, the position of the beams should be right above the heads of the audience attending the said shows.
You will also have to be aware of the graphics screen you are going to use on the stage. For the graphics screen, the rear-projection is obviously preferred over the front-projection. You will achieve a more magical effect since the audience does not see the beams creating the graphics you want to let them see.
Be aware of the proper equipment positioning. There are many other equipment that you have to use in the said event so you have to know exactly how they should be positioned. You have to know more about the lasers, its direct-feed projectors, and scanners to help create one projector unit. Position the equipment properly.
Control set up time and positioning. Having control over the positioning and the set-up time of this equipment is definitely a good thing for you. It will be easier for the person to decide on the graphics as well as what would happen when he or she has full control of the set up time or positioning of the said equipment.
Safety regulations should be one of your concerns with regards to the use of the projectors and related equipment. You have to know what those recognized safety regulations are and follow them so that you do not have any troubles. Aside from the said regulations, government and federal laws must be followed as well.
Ceiling heights. The ceiling heights are the lateral space and height between the audience and the said equipment. You have to take note of how much space you should put in between these two so that there is more space. As long as you remember the right amount of space to follow, it should be okay.
There may be reflective surfaces that are present in the area. It is required of you to pay close attention to these reflective surfaces, like chandeliers or mirror strips, since you do not want the beams to bounce off of these. To avoid any stray reflections, then you should cover the beams from them. That is also one of the precautions you can take for the sake of the audience.
The said equipment is the one where you will be using lasers to shoot off beams that will make the venue more concert-like. The stage will be adorned with different colored lights. The audience will feel more excitement as well. If you plan to use this lighting to make the event successful, then here are the factors to take note of.
First, you have to know how to get the proper beam direction. The equipment will be shooting off beams so you have to put it at the right position. That way, the beams can be aimed at its proper course. As much as possible, the position of the beams should be right above the heads of the audience attending the said shows.
You will also have to be aware of the graphics screen you are going to use on the stage. For the graphics screen, the rear-projection is obviously preferred over the front-projection. You will achieve a more magical effect since the audience does not see the beams creating the graphics you want to let them see.
Be aware of the proper equipment positioning. There are many other equipment that you have to use in the said event so you have to know exactly how they should be positioned. You have to know more about the lasers, its direct-feed projectors, and scanners to help create one projector unit. Position the equipment properly.
Control set up time and positioning. Having control over the positioning and the set-up time of this equipment is definitely a good thing for you. It will be easier for the person to decide on the graphics as well as what would happen when he or she has full control of the set up time or positioning of the said equipment.
Safety regulations should be one of your concerns with regards to the use of the projectors and related equipment. You have to know what those recognized safety regulations are and follow them so that you do not have any troubles. Aside from the said regulations, government and federal laws must be followed as well.
Ceiling heights. The ceiling heights are the lateral space and height between the audience and the said equipment. You have to take note of how much space you should put in between these two so that there is more space. As long as you remember the right amount of space to follow, it should be okay.
There may be reflective surfaces that are present in the area. It is required of you to pay close attention to these reflective surfaces, like chandeliers or mirror strips, since you do not want the beams to bounce off of these. To avoid any stray reflections, then you should cover the beams from them. That is also one of the precautions you can take for the sake of the audience.
About the Author:
You can visit www.stagelasers.com for more helpful information about Factors To Remember When Installing RGB Laser Show System.
0 comments:
Post a Comment